[iceman175]

i have been trying to set up ncs expert because i want to code out side marker lights and reset some bulb checks and everytime i load ncs i goto rev expert mode and select e89 and it says chasis error and i got the error log. so im just looking for help and how to solve this problem so i can start coding thanks.

================================================== ==============================(3)
[17:53:05.509] [2014-10-24] [SERIE] 1005 Error CEM.CPP CEMCheck_COAPIERR_TXT_Version 2
[17:53:05.509] [2014-10-24] [SERIE] <Unbekannte Fehlernummer> COAPI Fehlertextdatei C:\NCSEXPER\BIN\cfgdat\coapierr.ger nicht gefunden

================================================== ==============================
[17:53:09.269] [2014-10-24] [SERIE] 1021 Error COAPI.CPP coapiTraceAblauf 3
[17:53:09.269] [2014-10-24] [SERIE] <Unbekannte Fehlernummer> C:\NCSEXPER\BIN\WORK\ABLAUF.TRC

[17:53:09.284] [2014-10-24] [SERIE] 4432 Trace BAU_CONF.C ReadBauConfFile 1
[17:53:09.284] [2014-10-24] [SERIE] <Unbekannte Fehlernummer> C:\NCSEXPER\BIN\daten\E89_CONF.BAP

[17:53:09.284] [2014-10-24] [SERIE] 1000 Error CDH.C CDHSetBaureihe 4
[17:53:09.284] [2014-10-24] [SERIE] <Unbekannte Fehlernummer> E89

[17:53:09.284] [2014-10-24] [SERIE] 1000 Error COAPI.CPP coapiSetBaureihe 2
[17:53:09.284] [2014-10-24] [SERIE] <Unbekannte Fehlernummer> E89

[cryptomit]

Did you update SP-daten files for E89? I think that you didnt do this.

[nate5ks]

Also make sure your ignition is on and if you have JB4 or other piggyback set it to map 0 or equivalent or you will be unable to code.

[iceman175]

I updated daten and I have cobb accessport do i need that on the stock map to code