|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Resetting short counter in FRM2 with toolset32?
|
|
10-19-2014, 06:59 PM | #1 |
Enlisted Member
4
Rep 45
Posts |
Resetting short counter in FRM2 with toolset32?
This has me pretty stumped need some help...
For several weeks now i've had my front driver's side angel eye out. Angel eyes are coded as DRL, and the passenger side works fine, i replaced them both thinking maybe it burned out. Still didn't work, since bought bav tech and inpa cables and software. That's how i found a code in my frm2 module saying i had a short circuit. I read that this counter can be reset using toolset32 via inpa. I speak german so exploring the program isnt too hard as i can understand pretty much all the command options in the frm70 file without having to translate them. i think have it narrowed down to one or two different reset commands. However i don't know the format or process to enter the number of the circuit i'm trying to reset, in my case driver's side angel eye, or the corresponding number of that circuit. I have read the format for entering the command is hexadecimal? does anyone know? or is there a way to reset a range of numbers? thanks for any help |
10-20-2014, 04:54 PM | #2 |
Enlisted Member
4
Rep 37
Posts |
You have to enter each number individually. I did this 2 months ago for a 2008 E90 with the driver side angel eyes out. The number was some where between 2 and 10 for that particular car. Good luck.
|
Appreciate
0
|
10-21-2014, 12:43 PM | #5 |
Enlisted Member
4
Rep 37
Posts |
I tried one of these commands steuern_reset_kurzschlussabschaltung and _reset_kurzschluss_sperre. Try both of them and one should work. All I did was enter the number as a normal integer and execute.
|
Appreciate
0
|
10-21-2014, 07:13 PM | #8 |
Colonel
529
Rep 2,505
Posts |
Not collected by me, but I guess this is what you need?
Code:
FRM 87 LAMP NUMBER NAME LAMPNR TEXT 0x00 high beam headlights AUSGANG_FL_LINKS on the left, E92 / E93: Abbiegelicht on the left 0x01 high beam headlights AUSGANG_FL_RECHTS on the right, E92 / E93: Abbiegelicht on the right 0x02 dimmed headlights AUSGANG_AL_LINKS on the left 0x03 dimmed headlights AUSGANG_AL_RECHTS on the right 0x04 sidelight AUSGANG_BEGRL_LINKS on the left 0x05 sidelight AUSGANG_BEGRL_RECHTS on the right 0x06 fog lamp AUSGANG_NSW_LINKS on the left 0x07 fog lamp AUSGANG_NSW_RECHTS on the right 0x08 direction indicator AUSGANG_FRA_LINKS_VORN on the left in front 0x09 direction indicator AUSGANG_FRA_RECHTS_VORN on the right in front 0x0A direction indicator AUSGANG_FRA_LINKS_HINTEN on the left behind 0x0B direction indicator AUSGANG_FRA_RECHTS_HINTEN on the right behind 0x0C UNBELEGT_1 uncovered 1 0x0D lighting AUSGANG_BEL_WBL_TASTE WBL tracer 0x0E stoplight AUSGANG_BREMSLICHT_LINKS on the left 0x0F stoplight AUSGANG_BREMSLICHT_RECHTS on the right 0x10 stoplight AUSGANG_BREMSLICHT_MITTE mitte 0x11 AUSGANG_SL_BL_LINKS_1 tail light / stoplight on the left 1, E92 / E93: Day driving light on the left 0x12 AUSGANG_SL_BL_RECHTS_1 tail light / stoplight on the right 1, E92 / E93: Day driving light on the right 0x13 AUSGANG_SL_BL_LINKS_2 tail light / stoplight to the left of 2 0x14 AUSGANG_SL_BL_RECHTS_2 tail light / stoplight to the right of 2 0x15 sign light AUSGANG_KZL 0x16 interior lighting AUSGANG_INNENBELEUCHTUNG 0x17 AUSGANG_NSL_LINKS nebulous tail light on the left 0x18 AUSGANG_NSL_RECHTS nebulous tail light on the right 0x19 back driving light AUSGANG_RFL_LINKS on the left 0x1A back driving light AUSGANG_RFL_RECHTS on the right 0x1B break Force display AUSGANG_BFD_LINKS on the left 0x1C break Force display AUSGANG_BFD_RECHTS on the right 0x1D clip AUSGANG_KL_58G 58 gs FRM 70 LAMP NUMBERS NAME LAMPNR TEXT 0x00 high beam headlights AUSGANG_FL_LINKS or Abbiegelicht on the left 0x01 high beam headlights AUSGANG_FL_RECHTS or Abbiegelicht on the right 0x02 dimmed headlights AUSGANG_AL_LINKS on the left 0x03 dimmed headlights AUSGANG_AL_RECHTS on the right 0x04 sidelight AUSGANG_BEGRL_LINKS on the left 0x05 sidelight AUSGANG_BEGRL_RECHTS on the right 0x06 fog lamp AUSGANG_NSW_LINKS on the left, PL3 from 07/14 and (SA5A1 or SA896): Stoplight on the left 0x07 fog lamp AUSGANG_NSW_RECHTS on the right, PL3 from 07/14 and (SA5A1 or SA896): Stoplight on the right 0x08 direction indicator AUSGANG_FRA_LINKS_VORN on the left in front 0x09 direction indicator AUSGANG_FRA_RECHTS_VORN on the right in front 0x0A direction indicator AUSGANG_FRA_LINKS_HINTEN on the left behind 0x0B direction indicator AUSGANG_FRA_RECHTS_HINTEN on the right behind 0x0C AUSGANG_R56_CS_ORANGE PL3: Colour-Switch orange, but: LED addition direction indicator on the left 0x0D AUSGANG_R56_CS_BLAU PL3: Colour-Switch blue, but: LED addition direction indicator on the right 0x0E stoplight AUSGANG_BREMSLICHT_LINKS on the left, PL3 from 07/14 and SA5A1: Day driving light LED, PL3 from 07/14 and SA896: Day driving light on the left 0x0F stoplight AUSGANG_BREMSLICHT_RECHTS on the right, PL3 from 07/14 and SA5A1: Fog lamp LED, PL3 from 07/14 and SA896: Day driving light on the right 0x10 stoplight AUSGANG_BREMSLICHT_MITTE mitte 0x11 AUSGANG_SL_BL_LINKS_1 tail light / stoplight on the left 1 0x12 AUSGANG_SL_BL_RECHTS_1 tail light / stoplight on the right 1 0x13 AUSGANG_E70_SL_BL_LINKS_2_R56_SML_LV_RH E70: Tail light to the left of 2, R56: Side mark light on the left in front, on the right behind 0x14 AUSGANG_E70_SL_BL_RECHTS_2_R56_SML_RV_LH E70: Tail light to the right of 2, R56: Side mark light on the right in front, on the left behind 0x15 sign light AUSGANG_KZL 0x16 interior lighting AUSGANG_INNENBELEUCHTUNG 0x17 AUSGANG_NSL_LINKS nebulous tail light, the US: Break Force display on the left 0x18 AUSGANG_NSL_RECHTS nebulous tail light, the US: Break Force display on the right 0x19 back driving light AUSGANG_RFL_LINKS on the left Last edited by Sensible_; 10-21-2014 at 07:19 PM.. |
Appreciate
0
|
10-26-2014, 03:32 PM | #10 |
Enlisted Member
4
Rep 45
Posts |
Awesome guys!! there really was not much when you search coding frm2 or frm70, so this is a great resource.
I think my issue is actually my inpa cable itself... it shows a orange/red light for a few seconds after connecting, and inpa recognizes that it is connected, but no matter what it crashes after a few seconds... any advise or do i just need a new cable? |
Appreciate
0
|
06-10-2015, 09:55 PM | #12 |
Brigadier General
681
Rep 3,696
Posts |
Yeay, i got my AE's working... not gonna give any more update other then that
just kidding. Okay here is what i did: 1) Make sure i'm on map 0 2) Load INPA and make sure i have both black dots so i know my cable works 3) Close INPA (very important to do this) 4) launch TOOL32.EXE 5) click on "jobs" and start typing out: steuern_reset_kurzshlussabschaltung 6) click on the text box located under arguements and enter the various hex values (you will need to try both check marked and unchecked for the box that says DATA). Press F5 or double click on the job name to send each command one by one a) arguement = 0x0 (received error result) b) 0x1 (received error result) c) 0x2 (received error result) d) 0x3 (received error result) e) 0x4 (received error result) f) 0x5 (received error result) g) 0x6 (received error result) h) 0x7 (received error result) i) 0x8 (received error result) j) 0x9 (received error result) k) 0xa (received error result) l) 0xb (Got my first OKAY, and started to jump up and down with joy) 7) went back to the job for reading the counter and instead of showing 50... it was now 1 8) closed TOOL32.EXE and open INPA 9) cleared all errors in the FRM 10) start my car and enjoyed seeing my driver side AE alive again |
Appreciate
0
|
06-10-2015, 10:41 PM | #13 |
First Lieutenant
48
Rep 361
Posts |
Careful with aftermarket AE short circuit faults, investigate and solve the problem. The DME shutdowns the circuit to protect your ballast and you dont want to replace yours, costs 300$-400$.
Maybe you have a faulty wire or similar. |
Appreciate
0
|
01-22-2020, 05:07 PM | #14 | |
New Member
8
Rep 23
Posts |
Quote:
|
|
Appreciate
0
|
Bookmarks |
|
|