Audi A3 Clubsport quattro

MikeyV · 05-16-2014, 02:35 AM

F.ucking insane

Audi will be presenting the A3 clubsport quattro concept at the 2014 Wörthersee Meeting in Reifnitz (Kärnten). The concept study is based on the S3 Sedan and has a five-cylinder TFSI engine under the hood producing 386 kW (525 hp).

"The Audi A3 clubsport quattro concept shows our car and tuning fans at the Wörthersee just how much sporty potential there is in the A3 family and in our top-of-the-line engines such as the 2.5 TFSI. We have pushed the limits in every respect with this show car: power, dynamics, sound, design," says Prof. Dr. Ulrich Hackenberg, Member of the Board of Management for Technical Development.

Based on the S3 Sedan, the show car is equipped with a powerful five-cylinder TFSI engine. The turbocharged engine with direct injection in the show car boasts an impressive success story. Since 2010, an expert jury has already voted it "International Engine of the Year" in its category four times in succession. The 2.5 TFSI powers the production Audi RS Q3. In the show car, the 2,480 cc five-cylinder produces 386 kW (525 hp) for a specific output of 155.6 kW (211.7 hp) per liter. With a total weight of 1,527 kilograms (3,366.5 lb), this corresponds to a power-to-weight ratio of 2.9 kilograms (6.4 lb)/hp. Maximum torque of 600 Nm (442.5 lb-ft) is available between 2,300 and 6,000 rpm. The Audi A3 clubsport quattro concept accelerates from 0 to 100 km/h (62.1 mph) in 3.6 seconds and reaches a top speed of 310 km/h (192.6 mph).

BMW269 · 05-16-2014, 05:35 AM

I know it is a concept, but a good one. Now if only it were RWD based....

Billup · 05-16-2014, 06:45 AM

Wow, I can honestly say that this is by far one of my favorite designs out currently. Everything just looks so right on it. RWD + 6MT would really make this top notch.

ShocknAwe · 05-16-2014, 07:25 AM

Quote:

Originally Posted by Billup

Wow, I can honestly say that this is by far one of my favorite designs out currently. Everything just looks so right on it. RWD + 6MT would really make this top notch.

+1 on that!

TSM330i · 05-16-2014, 07:44 AM

Wow! This would be a total hit.

How in the hell does Audi build an AWD sedan and it only weighs 3365lbs! The M235 with the manual is 3,495lbs!

To give you an idea of what the potential for that engine is, check this out! "Only 450hp" and it hung right in there with a modified e60 M5, which we all know are monsters when it comes to rolling races.

rdub315 · 05-16-2014, 07:50 AM

DAMN

KingOfJericho · 05-16-2014, 08:18 AM

Quote:

Originally Posted by Billup

Wow, I can honestly say that this is by far one of my favorite designs out currently. Everything just looks so right on it. RWD + 6MT would really make this top notch.

+2 ,although I'm fine with AWD.

I love the look of this thing. The proportions are perfect.

Year's_End · 05-16-2014, 10:46 AM

This is the first Audi I've seen where the bulges, swells and bevels don't look all cold and calculated. It looks good. It actually looks different, and I respect them for that. I hope it ends up on the road.

DieGrüneHölle · 05-16-2014, 11:19 AM

Audi make this and don't change a thing.

PINeely · 05-16-2014, 12:05 PM

I like everything except the four rings on the rear doors.

MikeyV · 05-16-2014, 12:56 PM

Quote:

Originally Posted by PINeely

I like everything except the four rings on the rear doors.

I thought that was a nice touch.

PINeely · 05-16-2014, 01:00 PM

Quote:

Originally Posted by MikeyV

I thought that was a nice touch.

Hmm, doesn't do it for me. I prefer it to something like a chrome fender badge for sure but I don't like badges or logos on the side of any sort. Audis look great debadged too

son_of_siggy · 05-16-2014, 03:33 PM

Quote:

Originally Posted by PINeely

Hmm, doesn't do it for me. I prefer it to something like a chrome fender badge for sure but I don't like badges or logos on the side of any sort. Audis look great debadged too

I agree. For some reason I'm not feeling the rings . . .

IEDEI · 05-17-2014, 01:52 PM

Quote:

Originally Posted by Billup

Wow, I can honestly say that this is by far one of my favorite designs out currently. Everything just looks so right on it. RWD + 6MT would really make this top notch.

what are you smoking, man?! when have you ever seen a RWD Audi in modern memory?!

danniexi · 05-18-2014, 09:50 AM

slap an RS3 badge on there and take my money!

Billup · 05-19-2014, 06:15 AM

Quote:

Originally Posted by IEDEI

what are you smoking, man?! when have you ever seen a RWD Audi in modern memory?!

I'm smoking grand daddy kush, son.

I never implied Audi was known for mass producing RWD, I was simply stating things that I like, that would make the car that much more appealing for...., ME. So that means 6MT + RWD.

BMW269 · 05-19-2014, 06:23 AM

Quote:

Originally Posted by IEDEI

Quote:

Originally Posted by Billup

Wow, I can honestly say that this is by far one of my favorite designs out currently. Everything just looks so right on it. RWD + 6MT would really make this top notch.

what are you smoking, man?! when have you ever seen a RWD Audi in modern memory?!

ShocknAwe · 05-19-2014, 07:29 AM

Totally missed the rings on the rear doors. That probably won't make it to the production model IMO.

MikeyV · 05-19-2014, 08:03 AM

Quote:

Originally Posted by ShocknAwe

Totally missed the rings on the rear doors. That probably won't make it to the production model IMO.

I think thewy will make production, or at least as an option. Audi have used them in the past.

ShocknAwe · 05-19-2014, 08:20 AM

Quote:

Originally Posted by MikeyV

I think thewy will make production, or at least as an option. Audi have used them in the past.

Yes, but that looks like a decal whereas the rings in the A3 picture above look to be stamped into the door body panel. Could be my eyes deceived me. Don't see them making two different doors.

Red Bread · 05-19-2014, 08:55 AM

It already has different doors than the A3/S3 to accommodate the flared RS fenders.

Slops · 05-19-2014, 09:01 AM

I'll be all over that car if they do slap the RS3 name tag on it... i'll go pre-order that shizz today if they'll let me. That damn interior though... they have to at least make the screen dip into the dash because it just looks so out of place.

05-16-2014, 02:35 AM	#1
MikeyV Captain 74 Rep 805 Posts Drives: Audi A6 Avant & A1 Sportback Join Date: Jul 2010 Location: Norway iTrader: (0)	Audi A3 Clubsport quattro F.ucking insane Audi will be presenting the A3 clubsport quattro concept at the 2014 Wörthersee Meeting in Reifnitz (Kärnten). The concept study is based on the S3 Sedan and has a five-cylinder TFSI engine under the hood producing 386 kW (525 hp). "The Audi A3 clubsport quattro concept shows our car and tuning fans at the Wörthersee just how much sporty potential there is in the A3 family and in our top-of-the-line engines such as the 2.5 TFSI. We have pushed the limits in every respect with this show car: power, dynamics, sound, design," says Prof. Dr. Ulrich Hackenberg, Member of the Board of Management for Technical Development. Based on the S3 Sedan, the show car is equipped with a powerful five-cylinder TFSI engine. The turbocharged engine with direct injection in the show car boasts an impressive success story. Since 2010, an expert jury has already voted it "International Engine of the Year" in its category four times in succession. The 2.5 TFSI powers the production Audi RS Q3. In the show car, the 2,480 cc five-cylinder produces 386 kW (525 hp) for a specific output of 155.6 kW (211.7 hp) per liter. With a total weight of 1,527 kilograms (3,366.5 lb), this corresponds to a power-to-weight ratio of 2.9 kilograms (6.4 lb)/hp. Maximum torque of 600 Nm (442.5 lb-ft) is available between 2,300 and 6,000 rpm. The Audi A3 clubsport quattro concept accelerates from 0 to 100 km/h (62.1 mph) in 3.6 seconds and reaches a top speed of 310 km/h (192.6 mph).
	Appreciate 0 Tweet Quote

05-16-2014, 05:35 AM	#2
BMW269 Brigadier General 433 Rep 3,888 Posts Drives: BMW Join Date: Jul 2009 Location: Germany iTrader: (0)	I know it is a concept, but a good one. Now if only it were RWD based....
	Appreciate 0 Quote

05-16-2014, 06:45 AM	#3
Billup Banned 472 Rep 928 Posts Drives: Your mum crazy. Join Date: Jun 2013 Location: Baconopolos Island iTrader: (0)	Wow, I can honestly say that this is by far one of my favorite designs out currently. Everything just looks so right on it. RWD + 6MT would really make this top notch.
	Appreciate 0 Quote

05-16-2014, 07:44 AM	#5
TSM330i 2006 330i, TSM, Black, manual, sport 874 Rep 3,699 Posts Drives: '17 C2, GTI, Z4 3.0si Racecar Join Date: Nov 2005 Location: Chester Springs, PA iTrader: (2)	Wow! This would be a total hit. How in the hell does Audi build an AWD sedan and it only weighs 3365lbs! The M235 with the manual is 3,495lbs! To give you an idea of what the potential for that engine is, check this out! "Only 450hp" and it hung right in there with a modified e60 M5, which we all know are monsters when it comes to rolling races. __________________ 2017 Porsche C2 - manual of course 2015 GTI S 2008 BMW Z4 3.0si Coupe - because racecar
	Appreciate 0 Quote

05-16-2014, 07:50 AM	#6
rdub315 Captain 75 Rep 650 Posts Drives: '07 E90 335i Join Date: Jun 2010 Location: Traverse City, MI iTrader: (8) Garage List 2007 E90 335i [10.00]	DAMN __________________ - VTT Stage 2 turbos, VTT inlets, Cobb Pro Tune (E30 and 93 octane tunes), MFactory LSD, 335is clutch, CSF radiator, slim fans, Walbro 255, AE exhaust, AA downpipes, ETS FMIC, Vishnu DCI, ETS charge pipe, Tial BOV, BMS OCC - H&R Touring Cup Kit, Apex Arc8, M3 style front bumper, MTech style rear bumper and diffuser
	Appreciate 0 Quote

05-16-2014, 10:46 AM	#8
Year's_End Lieutenant General 1135 Rep 12,444 Posts Drives: 2020 Shelby GT350 Join Date: Feb 2007 Location: FL iTrader: (0)	This is the first Audi I've seen where the bulges, swells and bevels don't look all cold and calculated. It looks good. It actually looks different, and I respect them for that. I hope it ends up on the road. __________________ Past: '08 E92 335i\|ZPP\|ZSP\|6AT Past: '15 Mustang GT\|401A\|PP\|6MT Current: '20 Shelby GT350\|6MT
	Appreciate 0 Quote

05-16-2014, 11:19 AM	#9
DieGrüneHölle Colonel 1309 Rep 2,787 Posts Drives: M Join Date: Nov 2011 Location: bmw iTrader: (0)	Audi make this and don't change a thing.
	Appreciate 0 Quote

05-16-2014, 12:05 PM	#10
PINeely Lieutenant Colonel 1086 Rep 1,912 Posts Drives: 2013 535i, 2015 Tundra 1794 Join Date: Jul 2009 Location: Jackson, MS iTrader: (2)	I like everything except the four rings on the rear doors.
	Appreciate 0 Quote

05-18-2014, 09:50 AM	#15
danniexi Brigadier General 3050 Rep 4,387 Posts Drives: 2022 F97 X3M Comp LCI Join Date: May 2008 Location: NJ/NY iTrader: (15) Garage List 2022 BMW X3M Compet ... [10.00] 2016 BMW F80 M3 [10.00]	slap an RS3 badge on there and take my money! __________________ BMW MY22 F97 X3MC LCI - CURRENT BUILD THREAD\| Instagram: @danniexi BMW MY16 F80 M3 - GONE BMW MY08 E92 335XI - GONE BMW MY06 E46 325XI - GONE
	Appreciate 0 Quote

05-19-2014, 07:29 AM	#18
ShocknAwe 1Addict 3228 Rep 7,889 Posts Drives: E82 Mutt, M57 Truck Join Date: Jul 2012 Location: Charleston iTrader: (22)	Totally missed the rings on the rear doors. That probably won't make it to the production model IMO. __________________ 2010 135i 6MT Jet Black N54/3 FE82 Mutt \| BUILD THREAD \| GARAGE SALE
	Appreciate 0 Quote

05-19-2014, 08:55 AM	#21
Red Bread Major General 4463 Rep 9,160 Posts Drives: Smog machines Join Date: Oct 2008 Location: Austin, TX iTrader: (0)	It already has different doors than the A3/S3 to accommodate the flared RS fenders.
	Appreciate 0 Quote

05-19-2014, 09:01 AM	#22
Slops Major General 188 Rep 5,417 Posts Drives: 2005 C55 AMG Join Date: Jan 2011 Location: Oxford iTrader: (2)	I'll be all over that car if they do slap the RS3 name tag on it... i'll go pre-order that shizz today if they'll let me. That damn interior though... they have to at least make the screen dip into the dash because it just looks so out of place.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search