[Zepo.]

How can i get the download links? Already built the cable, anything i have to purchase?

Thanks in advance.

[shawnsheridan]

Originally Posted by Zepo.

How can i get the download links? Already built the cable, anything i have to purchase?

Thanks in advance.

PM sent.

[pitbub]

Originally Posted by shawnsheridan

No. It can't be anymore descriptive. That is every single step, one-by-one. Hundreds of people have followed these same exact instructions just fine. I have faith you can too.

victory! i have 6NS!

Thanks!
After my holidays i need Token for add another functions!
Thanks for information to get this.

EDIT: I want 6AM option, RRTI, U confirme i can't simply add this in SALAPA Element window? return of Newbie

[junkyjunky]

@shawnsheridan or others, I tried to go out and do some more coding last night after having a very successful Sunday afternoon of coding CA mirrors and some other little things, only to find I am unable to connect to my car anymore?

I tried restarting, did it with the car running, not running but connected to a power source, disconnecting and reconnecting the ENET, disabling AV and firewall, etc. all that I've seen in the forums, but I'm stumped! The only thing I didn't do was reinstall it and only because several posts noted that that would not likely solve anything.

Not sure if it matters, but my laptop was at <50% power when I tried to connect, can't see why that would be the problem though.

Anyone have any suggestions? I have not changed anything in my setup at all, which is what confuses me. I haven't even used my laptop since that Sunday when I coded last.

Any thoughts?

[steve@codemybimmer]

Originally Posted by junkyjunky

@shawnsheridan or others, I tried to go out and do some more coding last night after having a very successful Sunday afternoon of coding CA mirrors and some other little things, only to find I am unable to connect to my car anymore?

I tried restarting, did it with the car running, not running but connected to a power source, disconnecting and reconnecting the ENET, disabling AV and firewall, etc. all that I've seen in the forums, but I'm stumped! The only thing I didn't do was reinstall it and only because several posts noted that that would not likely solve anything.

Not sure if it matters, but my laptop was at <50% power when I tried to connect, can't see why that would be the problem though.

Anyone have any suggestions? I have not changed anything in my setup at all, which is what confuses me. I haven't even used my laptop since that Sunday when I coded last.

Any thoughts?

Have you tried letting the car sleep for 5 minutes then trying again? My connection is sometimes hot or miss but once I let the car sleep for a bit, it will work again.

[john08135i]

I need some help. Where is the up to date cheat sheet? The google doc i have is old.
Also no i see M3 and M4 logos available.

i need
*roll up windows from fob +time delay with mirrors
*m3 logo
*tpms temps
*mirrors fold and unfold

anything else new that i have missed?

[john08135i]

Also i would like everyone to recognize Shawn for helping us all so much. Shawn do you have a paypal? I would like to donate and i encourage others to donate. He has helped many of us for free over and over..

[shawnsheridan]

Originally Posted by john08135i

I need some help. Where is the up to date cheat sheet? The google doc i have is old.
Also no i see M3 and M4 logos available.

i need
*roll up windows from fob +time delay with mirrors
*m3 logo
*tpms temps
*mirrors fold and unfold

anything else new that i have missed?

I think everything except the logo is on the original Cheat Sheet, and he logo is KOMBI => BMW_LOGO, but 6WA Kombi is required for it.

[shawnsheridan]

Originally Posted by john08135i

Also i would like everyone to recognize Shawn for helping us all so much. Shawn do you have a paypal? I would like to donate and i encourage others to donate. He has helped many of us for free over and over..

I appreciate that, but I have never accepted money, and I am not about to start, as I have zero commercial interest in anything BMW related.

[shawnsheridan]

Originally Posted by pitbub

victory! i have 6NS!

Thanks!

Originally Posted by pitbub

...I want 6AM option, RRTI, U confirme i can't simply add this in SALAPA Element window? return of Newbie

I doubt it. Real Time traffic Information (6AM) service requires ConnectedDrive Services (6AK) and/or Intelligent Emergency Call (6AC). Beyond that, it is a subscription based service, so without 6AM Factory Installed, I don't see how your VIN will be whitelisted with the service.

[shawnsheridan]

Originally Posted by junkyjunky

@shawnsheridan or others, I tried to go out and do some more coding last night after having a very successful Sunday afternoon of coding CA mirrors and some other little things, only to find I am unable to connect to my car anymore?
...

Originally Posted by Aritaurus

Have you tried letting the car sleep for 5 minutes then trying again? My connection is sometimes hot or miss but once I let the car sleep for a bit, it will work again.

Aritaurus is correct. Usually this is due to the IP Port being locked out and having to be reset. Letting the car go to sleep for at least 5 minutes and connecting again with the engine running should work.

[junkyjunky]

Originally Posted by shawnsheridan

Aritaurus is correct. Usually this is due to the IP Port being locked out and having to be reset. Letting the car go to sleep for at least 5 minutes and connecting again with the engine running should work.

Thanks @shawnsheridan and @Aritaurus. I'll try tonight hopefully with success!

EDIT: You were both right, it worked first try this evening! Thanks for the help!!!

[junkyjunky]

Originally Posted by wibbles

I've tried coding BMW Live & Internet using the gude on this thread, no luck, can someone help me?

I'm trying to do this too. I've found the following code on the forums:
HU_CIC > 3000 HMI > CONNECTED_DRIVE > aktiv
HU_CIC > 3000 HMI > ONLINE_BROWSER_LIVE > aktiv
HU_CIC > 3003 > ONLINE_BROWSER > nur_bmw_internet_aktiv (only bmw internet aktive)
HU_CIC > 3003 > ONLINE_SERVICES = nicht_aktiv
HU_CIC > 3003 > ONLINE_SERVICES_GLS = nicht_aktiv
HU_CIC > 3003 > DUN_PROFILE-> aktiv
HU_CIC > 3003 > PAN_PROFILE > aktiv
HU_CIC > 3003 > BT_DATA_SERVICE > Aktiv

After coding, I get the BMW Live option, but when I try to use it, it tells me the service is not available. I have the 6NL package (my whole package list is available in my garage for my 328xi) so I figured I was good to go. Any thoughts on what is missing?

I couldn't find the line of code I highlighted in red and I'm not sure why you would leave the ones I highlighted in blue as "nicht_aktiv" (I tried coding them to "aktiv" and that didn't do anything either), what do they do?

Side note, happy to say that I did get a ton of stuff coded besides though (FDS, SAT, Weather Band, RTTI, video in motion, disclaimers, AC memory)

[shawnsheridan]

Originally Posted by junkyjunky

...Any thoughts on what is missing?

A Whitelisted VIN, that's authorized Internet / BMW Live services.

[junkyjunky]

Originally Posted by shawnsheridan

A Whitelisted VIN, that's authorized Internet / BMW Live services.

Thanks, asked too soon, I found your various posts from previous. Thanks again for being so helpful!!

For everyone else's reference:
http://www.bimmerfest.com/forums/sho...6&postcount=70
http://www.bimmerfest.com/forums/sho...0&postcount=13

@shawnsheridan, do you know what these two lines do? and why would you keep them inactive?
HU_CIC > 3003 > ONLINE_SERVICES = nicht_aktiv
HU_CIC > 3003 > ONLINE_SERVICES_GLS = nicht_aktiv

[shawnsheridan]

Originally Posted by junkyjunky

...@shawnsheridan, do you know what these two lines do? and why would you keep them inactive?
HU_CIC > 3003 > ONLINE_SERVICES = nicht_aktiv
HU_CIC > 3003 > ONLINE_SERVICES_GLS = nicht_aktiv

No, I don't. I tested them both ways, and don't recall it making a difference. I assume they are for "BMW Online", which is like BMW Live, but though BMW Assist instead of mobile phone.

[pitbub]

Originally Posted by shawnsheridan

I doubt it. Real Time traffic Information (6AM) service requires ConnectedDrive Services (6AK) and/or Intelligent Emergency Call (6AC). Beyond that, it is a subscription based service, so without 6AM Factory Installed, I don't see how your VIN will be whitelisted with the service.

I have 6AC, I can try? it isn't bad for my car or not visible by BMW? or wrong

[shawnsheridan]

Originally Posted by pitbub

I have 6AC, I can try? it isn't bad for my car or not visible by BMW? or wrong

You can certainly try. It won't hurt anything.

[Wibbles]

Originally Posted by shawnsheridan

A Whitelisted VIN, that's authorized Internet / BMW Live services.

So the VIN I'm using, is that whitelisted Shawn?

I've tried all manner of configurations but all I get in Connected Drive is:

Mobile Care
Dealer Assist - or something like that

BMW Apps

That's it - no "Update Services" option or anything else.

[cwazy1]

Hey Shawn,

Could you please PM me with some info on how to install and configure ESYS?

Thanks,

[shawnsheridan]

Originally Posted by cwazy1

Hey Shawn,

Could you please PM me with some info on how to install and configure ESYS?

Thanks,

PM sent.

[shawnsheridan]

Originally Posted by wibbles

So the VIN I'm using, is that whitelisted Shawn?

I've tried all manner of configurations but all I get in Connected Drive is:

Mobile Care
Dealer Assist - or something like that

BMW Apps

That's it - no "Update Services" option or anything else.

I have no idea what VIN you are using, so how could I answer that? Just run the VIN through a VIN Decoder, like www.bmwvin.com, and see if it has factory Interent Option, 614 or 6AR.

You need to read my thread here on this, because getting it working is a lot more involved:

http://www.bimmerfest.com/forums/sho...6&postcount=70