|
|
|
04-06-2014, 01:03 PM | #1 |
Captain
75
Rep 642
Posts |
help with dsc/abs fault codes
I went to go for a drive this afternoon and as soon as started to move I got a DSC /ABS fault on the dash and I drive. Idrive showed a "braking/chasis stabilization and DSC malfunction" and "start-off assistance inactive" faults. I tried clearing codes but its a hard fault and will not clear. My code reader showed the following:
P32D6- unknown P32C9- Poor-road-surface detection: No wheel-speed signal received I hope this will be a simple wheel speed sensor and not something like a DSC module. I can't track down what the first code is, does anybody know what it means? I am hoping it will point me to the specific sensor thats bad. Any help would be appreciated. Thanks
__________________
|
04-06-2014, 03:18 PM | #2 |
European Editor
10596
Rep 22,992
Posts |
Free bump - I am curious about what is causing your woes.
__________________
|
Appreciate
0
|
04-07-2014, 04:56 AM | #3 |
European Editor
10596
Rep 22,992
Posts |
I had a friend who works for BMW look up your codes. The first code p32d6 means: sensor (right/rear) is faulty. So I would start there.
G.L. Dack
__________________
|
Appreciate
0
|
04-07-2014, 05:23 AM | #6 | |
European Editor
10596
Rep 22,992
Posts |
Quote:
https://www.tachopix.de/controlunit/.../pagetype.iav/ @submarshall did bmw pick up the tab? And how many miles/old was your car?
__________________
|
|
Appreciate
0
|
04-07-2014, 12:11 PM | #7 |
Captain
75
Rep 642
Posts |
@submarshall
Thanks for the help @Dackelone ! This is much better news than having to change something expensive. And it will save me some time troubleshooting. I'll get a rear sensor ordered and try and get it swapped out this weekend.
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|