Quote:
Originally Posted by mr.fabulous
The hardest part is getting the frame of the fan past the part of the duct that holds the grommet. A little lube, the grommet comes easily out of the frame of the ductwork (this is difficult to describe in words). But then the frame of the ductwork that holds the grommet meets a part of the frame of the fan (below the grommet) and you just can't get around that.
This was not designed to be disassembled...
|
Thanks. Yes, I kind of see from your one pics how the frame of the fan has a clip that snaps into place. This must be the "clip" that everyone is referring too.
What about the intake ducts. Do you remove the torx bolts from the front bar of the cross over to loosen/remove the dual intake duct. ?
Btw... I took a look how tight the access is to the pulleys... I don't think you can do this job without removing the fan. Small or big hands... there just doesn't look like there is enough room to maneuver with the radiator fan is place.
Dackel