View Single Post
      12-28-2007, 03:37 PM   #14
nico335
Guest
0
Rep
n/a
Posts

Drives:


Quote:
Originally Posted by AndrewAZ View Post
I have a custom set up for L and l. Both auto mute K bands until they reach a certain level then alert me, but have no impact on Ka band or laser. And of course I have X band off since its not used in my area (thank god)

Instructions for K band auto mute, in l mode it shows the warning and when it goes over 4 bars alerts you, in big L it doesnt show any warning or alert until it goes over 4 bars (I mostly run in small l), when you hit the freeway change it to A mode and everything is normal. It also provides a 30 second auto mute so if you get a low signal for 30 seconds or more it alerts. It really is a must do for the V1 around town especially if they are using mostly KA in your area.

1.Go to programming mode in the v1.
2.go to option 7, then make sure the arrow is pointed DOWN. (it is pointed UP as default from VR)
3.go to option b next, make sure arrow is pointed DOWN.
4.go to option C next, make sure arrow is pointed UP.
5.go to option d next, make sure arrow is pointed UP.
6.go to option E next, make sure arrow is pointed UP (default).
7.go to option F next, make sure arrow is pointed UP (default).
8.go to option G, make sure arrow is pointed DOWN.
how do you go to programming mode?
Appreciate 0