[dubdemand]

Pleased to report fitting was easy...

This might not be the best way but I found it the easiest. First I lined up the spoiler as I wanted it and taped it into position. I then taped some cardboard in the correct position for each corner to use as a guide and then removed the spoiler, added the 3M tape and put it back on the car. The cardboard helped me position it back in exactly the same position and I had already removed the backing tape off the small strips at each end leaving just the long middle section to pull out as suggested in the instructions.

And there you have it perfect positioning, easy install and hopefully a rock solid mounting

My spoiler came from BC Moto on eBay and for £50 is a no brainer - it completes the rear end nicely IMO