Quote:
Originally Posted by E86Z
Resurrecting an old thread to help others. Thanks to op and the contributors making this so much easier.
I just did this, my car is a 2011 and the seats were 2009. The wiring diagrams kind of helped but here's what I did:
Passenger side very easy
I used one of these to connect the two wires 7 and 9 on the seat side
Driver side
Same deal but you have to bridge the plus side and the ground
So two of those connectors, red and black wire with the red and brown. Then brown with brown.
I managed to take a few pictures of the drivers side wiring:
 |
Ok I’m about to tackle this. Are you saying they don’t need to be repinned at all? They just need a jumper to connect the wires together? Essentially connecting them together so that power is now shared between both wires?